#Ilo 2 firmware upgrade fails how to#
#Ilo 2 firmware upgrade fails install#
#Ilo 2 firmware upgrade fails update#
#Ilo 2 firmware upgrade fails driver#
#Ilo 2 firmware upgrade fails password#

: Connected for 1 seconds, 905 bytes sent, 317 bytes received : Changing state from STATE_CLOSING to STATE_CLOSED : RECV: Disconnect packet (reason: 11: Disconnected by application. : Changing state from STATE_KEY_EXCHANGE to STATE_CLOSING : Changing state from STATE_EXPECT_KEX_INIT to STATE_KEY_EXCHANGE : Available Remote Recv Macs = hmac-sha1,hmac-md5 : Available Remote Send Macs = hmac-sha1,hmac-md5 : Available Remote Recv Ciphers = aes256-cbc,aes128-cbc,3des-cbc

: Available Remote Send Ciphers = aes256-cbc,aes128-cbc,3des-cbc : Available Remote Host Key Algos = ssh-rsa,ssh-dss : Selected Kex Method = diffie-hellman-group14-sha1 : Available Remote Kex Methods = diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 : CAP : Remote correctly handles : SEND : KEXINIT : CAP : Remote x.509v3 uses ASN.1 encoding for DSA signatures : CAP : Remote uses SHA1 hash in RSA signatures for x.509v3 : CAP : Remote correctly uses connected addresses in forwarded-tcpip requests : CAP : Remote correctly encodes OID for gssapi : CAP : Remote correctly handles unknown SFTP extensions : CAP : Remote supports new diffie-hellman group exchange messages : CAP : Remote uses 160 bit keys for SHA1 MAC : CAP : Remote includes port number in x11 open packets : CAP : Remote sends name in service accept packets : CAP : Remote sends error text in open failure packets : CAP : Remote sends algorithm name in signatures : CAP : Remote sends algorithm name in public key packets : CAP : Remote sends algorithm name in PK_OK packets

#Ilo 2 firmware upgrade fails password#

: CAP : Remote sends language in password change requests : RECV : Remote Identifier = 'SSH-2.0-mpSSH_0.2.1' : Changing state from STATE_NOT_CONNECTED to STATE_EXPECT_KEX_INIT

#Ilo 2 firmware upgrade fails update#

While power draining the server did get it out of this stuck updating state - the very next time I tried to update it to 2.10, it went back to this stuck updating state, where it is still stuck as of today.ДЄs this is a high availability host that is typically only remotely managed, I really want to limit the number of times I have to ask our customer to go on site to unplug this from power again.Code: : SSH2Core version 7.3.0.839.They recommended that I disconnect the server from power to get the iLO out of this stuck updating state and then upgrade the firmware to 2.10 instead, as an intermediate update. I contacted HP support in this thread.

#Ilo 2 firmware upgrade fails driver#

Version 4.4-0 (c) Hewlett-Packard Company, 2014ДЇirmware Revision = 1.51 Device type = iLO 4 Driver name = hpilo HP Lights-Out Online Configuration utility

#Ilo 2 firmware upgrade fails how to#

I can see this error in the RIBCL guide, and the error guide, but there is no explanation of what this error actually means or how to resolve it! I am assuming that this error is just saying it's failing to flash, due to it being stuck in this state? Here's the error in the full output:

I used an hponcfg script to update the iLO firmware from the command line.

#Ilo 2 firmware upgrade fails install#

I have done this from the /var/hp/tools/ install on ESXi on the server, and while it did successfully reset settings to defaults (set IP to 0.0.0.0, wiped user accounts etc), the iLO still is stuck in updating status afterwards. It says the resolution is to reset the iLO to defaults using hponcfg -r.

This error / failure to update I'm seeing, is actually mentioned in the HP iLO 4 user guide.

While the iLO does seem to restart, it goes right back to this stuck updating status upon login.

Tried restarting ('resetting') the iLO itself from the Diagnostics page, as well as from hponcfg.

I have tried many things to resolve this, here is a list: There's no option to cancel it, or try it again, etc. It will stay this way indefinitely (weeks at least) until the server is disconnected from power. It gets stuck on the screen of 'Checking HP Secure Digital Signature', and at the bottom of the screen, indicates 'Firmware Flash Progress: 1 %' - below is screenshot of this. This is the first and only server I've had this issue on across many generations and models of HPe servers.ДЇor some reason, this particular server fails to update. I have done this update many times through the iLO Web Interface, by uploading the ilo4_261.bin file, etc. I am trying to update it to 2.61, same as our other servers.

It's currently running iLO Firmware v1.5.1. The VM's it runs are Windows Server 2008 R2 Standard. I am trying to update the iLO 4 firmware on a HP ProLiant Dе…ѓ60p Gen8.